Відео

So many of these

how much did you charge for this whole process? What should be an average cost fo this? My S4 timing chain needs to be replaced I got quotes for 8700 9800 and 10300 to do this job. Do these numbers make sense?

Just make one

nice video over all. if the cam is locked from rotating and the timing chain is on......is the crank not locked as well? are we holding back up just to keep from damaging the timing components and not necessarily to keep the engine from spinning?

Has anyone install turbos separate like or can only be installed completely assembled as one piece

Thank you for sharing this tip. Everyone should be using this tip because it ensures proper ‘off and on with new timing belt’. One day when it’s time for me to do a timing belt I’ll be using your tip. Thank you for Down Under ‘Australia’ :)

Or you can just use your hand to push it down. I'm starting to think yall are weak AF. Lol

A video of a screenshot of a video. 🤯

So my truck has a by pass with relay, pump is winding.. we got it started drove for 2 hrs then heard something by high pressure pump, trk died.. replace HPPump marked gears inside.. getting fuel to injectors now but no start still

sir i just want to ask. i have ford focus 2009 1.8l 4dr. sometimes when i start my car it miss firing ¹st to ²nd time but on the 3rd time it completely fine. no miss firing. hope u will notice and may u can help me with this issue i have.

I entered the same giveaways only got 2😢😢😢😢

I've experienced this on a Toyota 22r. I'd like to know how rubber can cut steel like this. Blows my mind...

Cupcake pan

The whit piece that that arm attaches to is whats broken on mine

What is the rod called andthe part it attaches to?

I have and love the Topdon scanners!

I have a question, please. When you drain the oil inside the crankcase, does all the oil from the gearbox come down or not? I have seen people add oil inside the gearbox to also drain the remaining oil. Is this true? The question is: when the engine is off, does all the oil from the gearbox flow down into the crankcase?

Magnet trays all day long. This way stuff cant be bumped, roll away tip over....well at least for the magnetic things.

How long ago was the last oil change? Did he even say?

Use a collapsible set like that. The magnet keeps it on the lift table and they keep the hardware where I need it. Love em.

Do you remember how many miles this engine had and if it had it done previously?

Just finished mine. I appreciate the video. It’s very detailed and helped me enormously when it comes to finding some of the sensors to unplug for the wiring harness as well as location of some of the bolts and screws. Made my job so much easier. Great video.Thanks again.

7mm bolts suck! Always super shallow heads! But the. You get the 5.5mm which will keep your socket!

Good video, never had the opportunity to work on one of these but I will definitely reference back to this video when needed. Thank you

They only work if you have a lift

Thanks Tone for this easy to follow instructional video and the helpful tips/gotchas you always mention. I wish all mechanics took the same amount of pride in their work -- and were as honest -- as you. Great channel!

I’m imagining having to call a customer to say that the job is going to be an extra $400 because the last guy broke all the plastic bits. That must suck.

You do great work and proper instructions with torque specs. I appreciate what you do.

Great video. How much does this repair cost?

Okay so what's causing it

I was gonna do this for a friend and (after watching your video) told him to leave it to the professionals. 😅 It's a 15 year old car and I'm SURE I'll damage one or more rubber hoses in the process. Thx for letting me dodge that bullet.

Great tip, thank you. I will be doing this.

Flex pipe is leaking. Plus, air....hammer! Plus pickle fork

I have the forscan app and want to rebalance my hvb. It warned me that i might need a service manual to do this so i backed out. Do i need a service manual to perform that procedure?

Was this an oem battery? What brand of hybrid battery is good? Thank you for a helpful and rather comforting video

waooo you are awesome, thank you for such a great video and for the time

Excellent

I had my timing belt done and cam seals also but I feel the bolt in the camseal on the cam cover

That's what a pickle fork is for.

Hey awesome channel!! So I have a 2016 F250 Diesel I was on my way home the other day and all of the sudden I could not brake my brakes were hard as concrete and then I was seeing white smoke come out of my exhaust it freaked me out I don't know what was going on so I pulled over..... my truck is deleted with a switch on the Fly..... And I opened up the hood and of course I am not a mechanic I didn't see anything but I drove the truck home going 20 miles an hour I had to use both of my feet to brake..... is it the vacuum pump? because I do have that leak that you're talking about it's all over my driveway my wife's uncle is a diesel mechanic he is retired he doesn't mess with it anymore he told me that it is the vacuum pump but is the white smoke part of it is that normal that was coming out of the exhaust thank you so much!! Arthur Castaneda

I hope you made sure all the valves are closed before you start it cleaning them

DO YOUR CRANK AND CAM SEALS WHILE YOUR IN THERE.

Thanks!

You can make one in about 5 minutes with rebar and stay that little bit richer.I have a hook I made over 2 decades ago

I do have the Zeus+ and it's a durable scanner. Every Snap-on scan tool I purchased all the way back to the red brick is probably still working. They last decades! The Launch I had the diagun Mini Pros and a few others actually do more than the Snap-on but gave some false readings mainly on HVAC or ambient temp sensors. When it came time purchase updates, I declined. For the few features the Launch had the Snap-on didn't have it was great, but the life of these cheaper tools are short lived. Maybe it would have been better if I had the more advanced version of the tool. Except for Nissans, the Zeus+ is crazy fast doing pre scan on all modules. Fastest scanner I ever used. The only negative of the Snap-on Zeus+ is the price and it won't replace a laptop or even an iPad Air. Not very good for watching videos or tutorials, it eventually crashes at times watching UA-cam. But for a scan tool it's great.

When tightening header bolts

Well damn imma go do that right now

Is it a must to take your heads to the machine shop?

Yet again, we have a stupid tool. Only stupid people need. Most mechanics already have tools at their disposal to do this exact thing called a ratchet strap. Mabye new techs but eventually they will get a ratchet strap.

If your new hoses come with new quick connects, just use a Dremel at low speed setting and cut off the old connections.